ATW2110 - 2000 SERIES FREQUENCY-AGILE TRUE DIVERSITY UHF WIRELESS BELTPACK SYSTEM
Click on the picture below to get more information on UHF Wireless beltpack systems:
 AUDIO TECHNICA - ATW2110 - 2000 SERIES FREQUENCY-AGILE TRUE DIVERSITY UHF WIRELESS BELTPACK SYSTEM Buy Today @ The Sound Professionals, Inc. |
- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning finds an open channel at the touch of a button
- All 10 user-switchable channels are compatible—for easy use with multiple
systems; no confusing frequency groups
- True Diversity operation selects the better signal from the two receiver
sections, reducing dropouts
- Tone Lock™ tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display
featuring RF and AF metering
- Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety
of audio gear
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops
between the sound system and receiver
- ATW-T220 Handheld Microphone/Transmitter features PRO 41 Capsule for maximum
feedback rejection and consistent sound
SYSTEM CONFIGURATIONS
ATW-2110
ATW-R2100 receiver and ATW-T210 UniPak™ transmitter.
Select a Wireless Essentials® microphone or cable to complete the system.
MSRP* US$429.00
ATW-2120
ATW-R2100 receiver and ATW-T220 handheld cardioid dynamic microphone/transmitter.MSRP* US$499.00
OVERALL SYSTEM SPECIFICATIONS
Operating Frequency 656.125 to 678.500 MHz
Number of Channels 10 total
Frequency Stability ±0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Normal Deviation ±5 kHz
Operating Range 300' typical
Operating Temperature Range 41° F (5° C) to 113° F (45° C)
Frequency Response 100 Hz to 15 kHz
RECEIVER SPECIFICATIONS
Receiving System Dual independent RF sections, automatic-switching diversity
Image Rejection 55 dB nominal, 50 dB minimum
Signal-to-noise Ratio >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
Total Harmonic Distortion <1% (10 kHz deviation at 1 kHz)
Sensitivity 20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency 65.75 MHz, 10.7 MHz
Audio Output Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Output Connectors Unbalanced: 1/4" (6.3 mm) phone jack
Balanced: XLRM-type
Power Supply 120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply
Dimensions 8.27" (210.0 mm) W x 1.73" (44.0 mm) H
x 6.39" (162.2 mm) D
Weight 2.2 lbs (1.0 kgs)
Accessories Included Two flexible UHF antennas, rack-mount adapters, AC adapter
BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output 12 mW
Spurious Emissions Under federal regulations
Input Connections High impedance, low impedance, bias
Batteries Two 1.5V AA alkaline (not included)
Current Consumption 150 mA typical
Battery Life Approximately 9 hours (depending on battery type and use pattern)
Dimensions 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D
Net Weight 2.82 oz (80 g)
HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output 12 mW
Spurious Emissions Under federal regulations
Microphone Element Dynamic, unidirectional
Batteries Two 1.5V AA alkaline (not included)
Current Consumption 150 mA typical
Battery Life Approximately 9 hours (depending on battery type and use pattern)
Dimensions 9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter
Net Weight 7.81 oz (221.5 g)
The Sound Professionals carry the widest selection and have the lowest prices on UHF Wireless beltpack systems.